Coto baby Lunaro, Инструкция по эксплуатации

Страница: 17 / 52

10
GB
INSTRUCTION MANUAL
CHILD SEAT INSTALLATION (USE ISOFIX SYSTEM)
4. Push the child seat against the car seat to check that the ISOFIX system is fully
latched, ensuring that the child seat is as close to the car seat as possible. (fig. 4)
UNINSTALLING THE ISOFIX CONNECTORS
1. Pull the release buttons back to uninstall the ISOFIX system from the child seat.
(fig. 5)
INSTALLING THE TOP TETHER
1. Take the top tether and if required, lengthen the belt by pressing the top tether
brake button to release the strap, pulling to adjust as necessary. (fig. 6)
2. Attach the top tether hook to the top tether anchorage point which is recommended
in the owner’s manual for your car. (fig. 7)
Look for this symbol in your vehicle. (fig. G)
3. To tension the top tether, remove any slack by pulling on the free end of strap until it
is suitably tightened. The top tether will be properly tightened when the tension
indicator turns completely green. (fig. 8).
CHILD SEAT INSTALLATION (USE 3-POINT SEATBELT)
Only group 1 from approx. 9 months to 4 years of age (9-18kg).
1. Place the child seat in the vehicle, facing from the direction of travel. Turn unlock
the shaft and pull it out. (fig. 9)
2. Pull away the seat shell away from the seat base, insert 3-point seatbelt through
seat shell and seat base. (fig. 10)
3. Belly part of the 3-poit seatbelt go through two below belt guiders, lock 3-point
seatbelt until you hear a “click”. Then shoulder part of 3-point seatbelt go through the
lock-off device. Turn the lock-off device and locked. (fig. 11)
4.Pulling the 3-point seatbelt to remove any slack, and make sure there is no twist.
Push together the seat shell and seat base, insert back and turn locked the shaft.
(fig. 12)
LUNARO