Assembly / spare parts
02.01|PMP 16 - 25|en
27
Maintenance and Care
Notes
The following recommendations apply if the unit is operated as in-
tended in compliance with the specified operating parameters,
operating conditions and settings.
Original spare parts
When replacing damaged parts (wearing parts/spare parts) only
use SCHUNK original spares.
Maintenance and lubrication intervals
NOTICE
Environmental temperatures of more than 60 °C/ 140 °F can
harden the used lubricants faster!
Lubrication and maintenance works have to be carried out more
often.
interval
Component
Activity
every 3 months
/ 500km
Guide rails /
Carriage
Clean it with an oil-soaked cloth
Remove all incrustations of dust and grease
residues
Visual inspection for traces of wear.
Mechanical testing on backlash and ease of
movement of the guides.
Grease the intended lubrication points
(
10.3, Page 28)
regularly
rodless cylinder
Checking for leaks
10
10.1
10.2
www.comoso.com
