Assembly and Installation
02.01|PMP 16 - 25|en
19
Stop collar AS ….
The stop collar AS-... is mounted at the guide carriage of the portal
module.
•
Depending on the model suitable for one-or two-sided to ap-
proach the intermediate position.
•
The stop collar (Pos.5) can be used for precision adjustment of
the intermediate position within a ±3mm range.
•
With an appropriate version and setting, the intermediate posi-
tion can be approached from both sides without a loss of posi-
tion.
•
Independently of this, it is also possible to match the end posi-
tion damping to the specific mass by adjusting the shock absor-
ber (11).
•
The cover plate (6 and 7) is prepared for installation of a prox-
imity switch NI 30 that interrogates the precision position of
the stop slide
Fig. 8
: Section drawing stop collar AS
In accordance with the section drawing above, all parts can be or-
dered individually.
Ordering numbers are as indicated in the following example
•
Part-No.: AS 25-02
7.4.1
www.comoso.com
