Assembly and Installation
02.01|PMP 16 - 25|en
21
Handling
Further movement from the intermediate position is possible at
the portal of corresponding control module via a 5/3-way valve
without repeating stroke (center position = both chambers venti-
lated).
(
8, Page 24)
.
To determine the position of several intermediate positions in
which the portal module is currently a installation of the proximity
switch NI 30 is intended.
It will be fixed with the clamping screw (20).
A switch cam will be requested at the stop slide.
Achieving a precise end position is sensed by the sensors NI30 on
the stop slide.
Thus any intermediate position and end position can be requested
exactly.
7.4.3
Controlling
determination of the
position / sensors
www.comoso.com
