Corvalent Gator Mini-ITX Скачать руководство пользователя | Manualshive

Страница: 9 / 71

background image

Chapter 1: Pre-Configuration

Chapter 1

Pre-Configuration

This chapter provides all the necessary information for installing the Gator Mini-ITX into a standard PC chassis.
Topics discussed include: installing the CPU (if necessary), DRAM installation and jumper settings.

Handling Precautions

The Gator Mini-ITX has been designed to be as rugged as possible but it can be damaged if dropped, jarred sharply
or struck. Damage may also occur by using excessive force in performing certain installation procedures such as
forcing the system board into the chassis or placing too much torque on a mounting screw.

Take special care when installing or removing the system memory DIMMs. Never force a DIMM into a socket.
Screwdrivers slipping off a screw and scraping the board can break a trace or component leads, rendering the board
unusable. Always handle the Gator Mini-ITX with care.

Special Warranty Note:

Products returned for warranty repair will be
inspected for damage caused by improper
installation and misuse as described in the
previous section and the static warning below.
Should the board show signs of abuse, the
warranty will become void and the customer will
be billed for all repairs and shipping and
handling costs.

Static Warning

The Gator Mini-ITX contains delicate electronic semiconductors that are highly sensitive to static electricity. These
components, if subjected to a static electricity discharge, can be weakened thereby reducing the serviceable life of
the system board. BEFORE THE BOARD IS REMOVED FROM ITS PROTECTIVE ANTISTATIC
PACKAGING, TAKE PROPER PRECAUTIONS! Work on a conductive surface that is connected to the ground.
Before touching any electronic device, ground yourself by touching an unpainted metal object or, and highly
recommended, use a grounding strap.

1

«
...
7
8
9
10
11
...
»

Содержание Gator Mini-ITX








































































Отзывы:

Нет отзывов

Похожие инструкции для Gator Mini-ITX

Бренд: ECS Страницы: 72

Бренд: Gigabyte Страницы: 40

Бренд: Zamel Страницы: 2

Бренд: Gigabyte Страницы: 31

Бренд: DFI Страницы: 92

Бренд: Avalue Technology Страницы: 80

Бренд: Advantech Страницы: 104

Бренд: Gigabyte Страницы: 96

Бренд: Biostar Страницы: 68

Бренд: Wolfson Страницы: 46

Бренд: IEI Technology Страницы: 12

Бренд: TRIGEM Страницы: 17

755FXK8AA series

Бренд: Foxconn Страницы: 87

Бренд: Taiwan Commate Computer Inc. Страницы: 31

Бренд: DFI Страницы: 96

Lanparty JR P45-T2RS

Бренд: DFI Страницы: 146

Бренд: DFI Страницы: 93

Бренд: AMI Страницы: 47

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды