manualshive.com logo in svg

Corvalent Gator Mini-ITX, Руководство по установке

"Corvalent Gator Mini-ITX" - компактная плата Mini-ITX с удобным монтажным руководством. Скачайте бесплатное Руководство по установке на manualshive.com и наслаждайтесь продуктом.

Поделиться
Скачать
background image

 

 

Chapter 2:BIOS Configuration 

On Board AC97 Audio 

Set this option to Enable or Disable the on board Audio AC97 controller. If Audio is enabled, certain OSs will 
require a driver installation on every boot. 

Enabled

 This setting will keep the onboard Audio Controller enabled. This is the default setting. 

Disabled

 This setting will turn off the on board Audio controller. 

 
Primary LAN 

Set this option to Enable or Disable the on board primary LAN controller. 

Enabled

 This setting will keep the onboard Primary Ethernet Controller enabled. This is the default setting. 

Disabled

 This setting will turn off the on board primary Ethernet controller. 

 
Secondary LAN 

Set this option to Enable or Disable the on board (optional) secondary LAN controller. This option does not appear 
on boards without the optional secondary LAN controller. 

Enabled

 This setting will keep the optional onboard secondary Ethernet Controller enabled. This is the default setting. 

Disabled

 This setting will turn off the optional on board secondary Ethernet controller. 

 
Restore on A/C Power Loss 

Set this value to select how the CPU board will recover from an accidental A/C power failure – Mechanical off G3 
State. 

Power ON

 This setting will force the CPU board to turn ON as soon as A/C power is reestablished. This is the default 

setting. 

Power OFF

 This setting will keep the CPU board OFF when A/C power is reestablished. To turn the board ON, the 

power button must be used. 

Last State

 This setting will put the CPU board back to its state before the accidental power failure. It requires ACPI 

enabled and an ACPI capable OS. The board must be normally turned OFF through a controlled S5 (soft OFF/Power 
button) transition if it is not an accidental power failure. 

 
 

SATA Control 

Set this option to Enable or Disable the on board SATA controller.  

Enabled

 This setting will keep SATA Controller enabled. This is the default setting. 

Disabled

 This setting will turn off SATA controller. 

 

SATA RAID Control 

Set this option to Enable or Disable the RAID function of the on board SATA controller.  

Enabled

 SATA Controller in RAID mode enabled. This is the default setting. 

Disabled

 This setting will turn off SATA controller RAID function. 

 
 

 
Power Management Setup  

 
Select the 

Power 

tab from the ezPORT setup screen to enter the Power BIOS Setup screen. You can display a Power 

BIOS Setup option by highlighting it using the <Arrow> keys. All Power BIOS Setup options are described in this 
section. 

 
Power Management/APM 

Set this option to Enable or Disable the SMI based power management and APM support.  

Enabled

 This is the default setting. 

Disabled

  

 
Power Button Mode 

This option specifies how the power button mounted externally on the computer chassis is used. The settings are: 
On/Off and suspend. The default setting is On/Off.  

On/Off

 This is the default setting. 

Suspend

  

 

29

 

Содержание Gator Mini-ITX








































































Отзывы:

Нет отзывов

Похожие инструкции для Gator Mini-ITX

Acer V70MA Safety Instructions preview
V70MA
Бренд: Acer Страницы: 12
ASRock Industrial IMB-1712 User Manual preview
IMB-1712
Бренд: ASRock Industrial Страницы: 44
MSI A75A-G35 Series Manual preview
A75A-G35 Series
Бренд: MSI Страницы: 72
MACHINIST H61M-S1 User Manual preview
H61M-S1
Бренд: MACHINIST Страницы: 15
J&W JW-H61M-D3 User Manual preview
JW-H61M-D3
Бренд: J&W Страницы: 36
Freetech P8F155 User Manual preview
P8F155
Бренд: Freetech Страницы: 79
Sundance Spas SMT327 User Manual preview
SMT327
Бренд: Sundance Spas Страницы: 21
Supermicro Supero C7X58 Quick Reference Manual preview
Supero C7X58
Бренд: Supermicro Страницы: 1
Gigabyte GA-EP45T-DS3 User Manual preview
GA-EP45T-DS3
Бренд: Gigabyte Страницы: 116
Global American 3303788 User Manual preview
3303788
Бренд: Global American Страницы: 31
TYAN S2866 Manual preview
S2866
Бренд: TYAN Страницы: 81
PC Chips M598LMR User Manual preview
M598LMR
Бренд: PC Chips Страницы: 49
DFI NP900-B16C User Manual preview
NP900-B16C
Бренд: DFI Страницы: 121
SOYO SY-P4IS2 User Manual preview
SY-P4IS2
Бренд: SOYO Страницы: 93
ASROCK G41M-S3 Specifications preview
G41M-S3
Бренд: ASROCK Страницы: 5
ASROCK G31DE User Manual preview
G31DE
Бренд: ASROCK Страницы: 100
Winmate TA33 User Manual preview
TA33
Бренд: Winmate Страницы: 24
Winmate IV32 User Manual preview
IV32
Бренд: Winmate Страницы: 71

Бренды по названию

Популярные бренды

Загрузить еще бренды