Corvalent Gator Mini-ITX Скачать руководство пользователя | Manualshive

Страница: 29 / 71

background image

Chapter 2:BIOS Configuration

AML

ACPI Machine Language (AML) is a binary code format that the operating system's ACPI AML interpreter parses
to discover the machine's properties. On boot up the BIOS startup code copies it into system memory, where it can
be interpreted by the operating system’s ACPI AML interpreter.

Headless Mode

This option is used to update the ACPI FACP table to indicate headless operations.

Disabled

This option disables updating the ACPI FACP table to indicate headless operation. This is the default setting.

Enabled

This option enables updating the ACPI FACP table to indicate headless operation.

Chipset ACPI Configuration

You can use this screen to select options for the Chipset ACPI Configuration Settings. Use the up and down
<Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of the selected option. A
description of the selected item appears on the right side of the screen.

APIC ACPI SCI IRQ

The Optimal and Fail-Safe default setting is

Disabled

.

EVENT LOG CONFIGURATION SCREEN

EVENT LOG Configuration Screen

You can use this screen to select options for the Event Log settings. Use the up and down <Arrow> keys to select an
item. Use the <Plus> and <Minus> keys to change the value of the selected option.

PCI Error Logging

Enables or disables PCI Error logging. The Optimal and Fail-Safe default setting is

Disabled

.

Enabled

.

Disabled

.

USB CONFIGURATION SCREEN

USB Configuration Screen

You can use this screen to select options for the USB Configuration. Use the up and down <Arrow> keys to select
an item. Use the <Plus> and <Minus> keys to change the value of the selected option.

USB Function

Number of USB ports enabled. The Optimal and Fail-Safe default setting is

6 USB Ports

2, 4, 6

Legacy USB Support

Legacy USB Support refers to the USB mouse and USB keyboard support. Normally if this option is not enabled,
any attached USB mouse or USB keyboard will not become available until a USB compatible operating system is
fully booted with all USB drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard
can control the system even when there is no USB drivers loaded on the system. Set this value to enable or disable
the Legacy USB Support. The Optimal and Fail-Safe default setting is

Auto

.

Disabled

Set this value to prevent the use of any USB device in DOS or during system boot.

Enabled

Set this value to allow the use of USB devices during boot and while using DOS.

Auto

This option auto detects USB Keyboards or Mice and if found, allows them to be utilized during boot and while

using DOS.

USB 2.0 Controller Mode

Set this option to HiSpeed for 480Mbps or FullSpeed for 12Mbps.

21

«
...
27
28
29
30
31
...
»

Содержание Gator Mini-ITX








































































Отзывы:

Нет отзывов

Похожие инструкции для Gator Mini-ITX

Бренд: Ampro Страницы: 72

Бренд: MINN KOTA Страницы: 14

Бренд: Analog Devices Страницы: 13

Z690 Phantom Gaming 4

Бренд: ASROCK Страницы: 109

Бренд: Biostar Страницы: 85

Бренд: AOpen Страницы: 8

Бренд: JETWAY Страницы: 57

Бренд: Photonic Universe Страницы: 6

Бренд: Magic-Pro Computer Страницы: 40

Бренд: Global American Страницы: 135

Бренд: NXP Semiconductors Страницы: 40

BOOSTXL-DRV8323Rx

Бренд: Texas Instruments Страницы: 28

Бренд: HONDA marine Страницы: 2

BeagleBone Black Proto Cape

Бренд: sparkfun Страницы: 4

Z87 Extreme9/ac

Бренд: ASROCK Страницы: 116

Бренд: TYAN Страницы: 130

nForce 680i LT SLI

Бренд: XFX Страницы: 137

Бренд: STMicroelectronics Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды