Corvalent Gator Mini-ITX, Руководство по установке

Страница: 36 / 71

Gator Mini-ITX – Installation Guide
Configure DRAM Timing by SPD
Set this value to disabled, so the desired DRAM parameters can be set or let them be retrieved from the SPD. The
Optimal and Fail-Safe default setting is
Enabled .
Memory Hole
Enables the 15MB – 16MB memory hole. The Optimal and Fail-Safe default setting is Disabled .
Initial Graphics Adapter Priority
Set this value to allow the Primary video device to be selected. The Optimal and Fail-Safe default setting is
AGP/PCI .
Internal VGA, AGP/Int. VGA, AGP/PCI, PCI/AGP, PCI/Int. VGA
Graphics Mode Select
Set this value to select the amount of system memory used by the internal graphics device for legacy VESA modes.
The Optimal and Fail-Safe default setting is
Enabled, 8MB .
Disabled This setting will not assign memory for the internal graphics engine.
Enabled, 1MB This setting will enable the internal graphics engine and allocate 1MB of system memory for it.
Enabled, 4MB This setting will enable the internal graphics engine and allocate 4MB of system memory for it.
Enabled, 8MB This setting will enable the internal graphics engine and allocate 8MB of system memory for it. This is
the default setting.
Enabled, 16MB This setting will enable the internal graphics engine and allocate 16MB of system memory for it.
Enabled, 32MB This setting will enable the internal graphics engine and allocate 32MB of system memory for it.
IGD Device 2, Function 1
Enable or Disable the internal graphics device by setting item to the desired value. The Optimal and Fail-Safe
default setting is
Enabled .
Disabled .
Enabled .
Boot Type
Selects the display devices to be enabled during boot.
VBIOS default. Let the Video BIOS decide based on its settings. Default option.
CRT. CRT only.
LFP. LVDS Panel only.
CRT+LFP. CRT and LVDS panel on.
Flat Panel Type
Selects the LVDS panel resolution to be enabled. Default is 1024x768.
640x480.
800x600.
1024x768.
1280x1024.
1400x1050.
1600x1200.
Flat Panel Scaling
Selects the policies for LVDS panel scaling. The CRT and LVDS must have the same resolution.
Disabled.
Auto.
Force Scaling.
SOUTH BRIDGE CONFIGURATION
Intel ICH4 South Bridge Configuration
You can use this screen to select options for the South Bridge Configuration. Use the up and down <Arrow> keys to
select an item. Use the <Plus> and <Minus> keys to change the value of the selected option.
28