Corvalent Gator Mini-ITX, Руководство по установке

Страница: 27 / 71

Chapter 2:BIOS Configuration
3, 4, 10 or 11 .
Serial Port2 Mode
This option allows installation of an Infra-red device by the Serial Port. The settings are Normal ( default ), IRDA and
ASK IR.
Infra-Red Transmission Mode
The settings are Full Duplex ( default ) or Half Duplex.
Receiver/Transmitter Polarity
Sets polarity for IR modes.
Serial Port3 Address
This option specifies the base I/O port address of serial port 3. The default setting is Disabled.
Disabled, 3F8 , 2F8 , 3E8 , 2E8, 338, 238
Serial Port3 IRQ
This option specifies the IRQ of serial port 3. This option is not available if serial port 3 is disabled .
3, 4, 10 or 11 .
Serial Port4 Address
This option specifies the base I/O port address of serial port 4. The default setting is Disabled.
Disabled, 3F8 , 2F8 , 3E8 , 2E8, 338, 238
Serial Port4 IRQ
This option specifies the IRQ of serial port 4. This option is not available if serial port 4 is disabled .
3, 4, 10 or 11 .
Serial Port5 Address
This option specifies the base I/O port address of serial port 5. The default setting is Disabled.
Disabled, 3E8 , 2E8, 338, 238, 228, 220
Serial Port5 IRQ
This option specifies the IRQ of serial port 5. This option is not available if serial port5 is disabled .
3, 4, 5, 6, 7, 10, 11 .
Serial Port6 Address
This option specifies the base I/O port address of serial port 6. The default setting is Disabled.
Disabled, 3E8 , 2E8, 338, 238, 228, 220
Serial Port6 IRQ
This option specifies the IRQ of serial port 6. This option is not available if serial port6 is disabled .
3, 4, 5, 6, 7, 10, 11 .
Parallel Port Address
This option specifies the I/O address used by the parallel port. The Optimal setting is 378 . The Fail-Safe setting is
Disabled .
Disabled Set this value to prevent the parallel port from accessing any system resources. When the value of this option
is set to Disabled , the printer port becomes unavailable.
378 Set this value to allow the parallel port to use 378 as its I/O port address. This is the default setting. The majority of
parallel ports on computer systems use IRQ7 and I/O Port 378H as the standard setting.
278 Set this value to allow the parallel port to use 278 as its I/O port address.
3BC Set this value to allow the parallel port to use 3BC as its I/O port address.
Parallel Port Mode
This option specifies the parallel port mode. The Optimal setting is Normal . The Fail- Safe setting is Disabled .
Normal Set this value to allow the standard parallel port mode to be used. This is the default setting.
Bi-Directional Set this value to allow data to be sent to and received from the parallel port.
19