CorroVenta A2 ES, Руководство пользователя

Страница: 21 / 45

© Corroventa Ltd. 2017.05 20 (43)
Extra Heater CTR A4ESX
The CTR A4 ESX is equipped with an Extra Heater
increasing the temperature of the dry air and thus
further improving the drying effect.
When this function is selected, there is an Extra Heater
icon in the default view below the fan symbol.
Naturally, the Extra Heater is only active when the fan
is active.
Note: The Extra Heater must not be used if the dry air is
fed into another machine as this could cause overheat.
Timer
The CTR A ES has built-in timer functionality allowing
the user to determine when the machine shall operate.
When Timer function is used, the word Timer is
presented in the top right corner of the default view as
can be seen to the right.
To activate Timer, push the right arrow button four
times to enter the Timer menu.
Push Activate.
When timer is activated, as a first step, the machine
asks the user to verify that its time and date settings
are correct. If so, push OK. If changes are required,
push edit to do the required changes before continuing.
In the next step, the user is allowed to set the time
interval within which the machine shall operate. The
machine remembers the timer settings from last time it
was used and presents that data as default.
The Outside int. setting determines whether, for the
remaining hours of the day, the machine shall remain in
stand-by or if it should operate with a lower fan speed
so as to minimize the noise.