CorroVenta A2 ES, Руководство пользователя

Страница: 16 / 45

© Corroventa Ltd. 2017.05 15 (43)
Capacity mode
Indicates what
capacity mode is
selected, Max, Eco
or ΔX.
Wet air volume indicator
↕ -optimum wet air volume.
↑ - wet air volume should be
increased, it is currently too
low
↓ - wet air volume should be
decreased, it is currently too
high
SuperVision
Visible when the
machine is
connected to
SuperVision for
remote monitoring
and control.
Network status
“Master” or “Slaved”
If the machine is
connected to local
network, this position
indicates whether the
machine is controlling
the network, Master, or
if it is controlled by
other machine and thus
Slaved.
Timer
Visible when
machine is set to
operate on Timer.
Slaved – indicates
that the machine
is controlled by
other machine.
Alarm
Machine has
detected an error.
Drying indicator
Moving when
drying is on-going.
Fan indicator
Moving when fan
is running.
Fan mode
Cont - continuous
fan.
If not displayed,
fan only operates
when drying is
required.
Control mode
Indicates how the drying
is controlled, if it is
continuous (MAN -
manual) or if it operates
to defined setpoint
Relative Humidity, RH,
mixing ratio, MIX or Dew
point, DEW. It can also
be controlled by external
hygrostat, HYG.
If external Relative
Humidity and
temperature sensor is
used, this position reads
E.RH, E.MIX or E.DEW.
Extra heater
(CTR A4 ESX)
Displayed when
Extra Heater is
activated.
Symbol moves
whenever the
Extra Heater is on.
Setpoint
adjustment
indicates that the
left and right
buttons below the
screen are used to
increase and
decrease the
setpoint which is
displayed with
black background.