Cornwell Tools MIG 250MGS, Руководство пользователя

Страница: 20 / 28

Page of 28 20
The WEAVE BEAD Used when you want to deposit metal over a wider space than would be
possible with a stringer bead. It is made by weaving from side to side while moving with the torch. It
is best to hesitate momentarily at each side before weaving back the other way.
8.3 Welding position
FLAT POSITION is easiest of the welding positions and is most commonly used. It is best if you can
weld in the flat position if at all possible as good results are easier to achieve.
HORIZONTAL POSITION Is performed very much the same as the flat weld except that angle B
(see HOLDING THE TORCH) is such that the wire, directed more toward the metal above the weld
joint is to help prevent the weld puddle from running downward while still allowing slow enough
travel speed. A good starting point for angle B is about 30 degrees DOWN from being
perpendicular to the work piece.