CORNING SCF-6, Руководство пользователя

Страница: 28 / 32

SCF-6 Canister and Inline Splice Closures
Page 28 SRP 003-485 • Issue 6 • October 2006
Step 2 Verify there is no sealing tape in
the sealing ring channel.
Flatten any sealing tape with a
flat-tipped screwdriver.
Step 3 Use the supplied brush to apply
a third of the UCN lubricant
tube to the sealing ring channel
on the end cap (Figure 49).
5.14 Seal the Canister Closure
NOTE: Do not use liquid encapsulant in SCF closures.
5.14.1 Install seal
Step 1 Roll the sealing ring over frame (Figure 48)
and down to the end cap with arrows as
shown.
IMPORTANT: The sealing ring must be installed in the
orientation shown.
KPA-0490
Figure 48 — Sealing Ring
L
U
B B
R
I ICA
N N
T T
KPA-0479
Figure 49 — Lubricate Sealing Ring Channel
Step 4 Stretch the sealing ring over the channel (Figure 50).
Step 5 Fold the edge of the seal that overlaps the outside of the end cap until the seal seats
in the channel as shown in Figure 51.
IMPORTANT:
The installed sealing ring must be oriented as shown toward the inside of the closure
(Figure 51).
KPA-0491 KPA-0293
Figure 50 — Install Sealing Ring
Figure 51 — Fold Sealing Ring