Cornelius IDC PRO 255, Руководство по установке

Страница: 14 / 43

IDC Pro 255 Installation Manual
© 2016-2018, Cornelius Inc. - 11 - Publication Number: 621058578INS
PREPARING FOR OPERATION
S
ERVICE
M
ODE
The Service mode is used to perform all of the maintenance and troubleshooting for the unit. There are three menu
levels available depending on the classification of the operator. Figure 5. shows the service mode screen for opera-
tors, Figure 6. shows the service mode screen for supervisors and Figure 7. shows the service mode screen for ser-
vice technicians. To enter the service mode, perform the procedure in Table 6.
Table 6.
Step Action
1
Display the keypad screen by tapping each
corner of the video screen starting in the upper
right corner and continuing to tap each corner
in a counterclockwise direction, in the form of a
“C”.
NOTE: As each corner is touched, a
small confirmation rectangle
momentarily appears to con-
firm the touch.
2
Input the proper password for your access
level (operator, manager or technician) and
press Enter. The Service UI screen is dis-
played, as shown in Figure 5., Figure 6. or Fig-
ure 7., depending on your access level.
NOTE: Each access level has a differ-
ent password.Units are shipped
with following preset pass-
words: 1111 (Operator level)
2222 (Manager level) 3333 tech-
nician level)
Unless customer specific passwords are
configured on a custom basis.
1 2
3
4 5
6
7 8 9
0
Enter <