Cormach GEO 10, Руководство по обслуживанию

Страница: 9 / 44

Technical service manual
GEO 10
9
WHEEL ALIGNER SOFTWARE
The wheel aligner is supplied with the operating system and software already installed.
The CD-ROM supplied carries a copy of the wheel aligner software.
The DVD-ROM supplied carries a Ghost image of the operating system only, customised for
the motherboard.
The computer is pre-configured to perform the login automatically, so that the user is not
required to identify himself whenever he powers up the wheel aligner computer. The fol-
lowing parameters have been set:
User name: Administrator
Password: administrator [ in lowercase letters ].
During installation or upgrade of the wheel aligner software, the computer is
restarted once or more. When the computer is restarted, you will be prompted
to enter the password: type
administrator
The standard user has also been entered to maintain compatibility with a number of vehicle
manufacturers:
standard user:
User name: User
Password: user
NOTE: the wheel aligner must be set for access by means of the Administrator user
name.
When the machine is switched on, the release of the software installed will appear on the
screen.
Compare this release with that stated on the installation CD-ROM supplied
with the aligner.
If the CD-ROM release is more recent than the release installed, upgrade the aligner softwa-
re.
The first time the equipment is switched on, you may be prompted to type the number of
the release of the databank on the CD-ROM supplied with the wheel aligner. In this case,
copy the databank release number (screen-printed on the wheel aligner CD-ROM) into the
data input screen which appears on the display. Follow the instructions on the screen.
NOTE: To restore the original operating system configuration, use the GHOST-
DVD supplied.
WARNING: Before using the GHOST-DVD, check that the screen printing on the
DVD carries the same model as the motherboard to be reset.
WARNING: using the GHOST-DVD causes loss of all the data relating to the jobs
done and the set-ups of the peripherals installed (e.g. the printer).