Cormach GEO 10, Руководство по обслуживанию

Страница: 17 / 44

Technical service manual
GEO 10
17
In this case there are two lines with an index of “_-4=”
It is important not to repeat two lines with the same index so, in view of what has just been
said, we recommend that you insert, in the file “Printer.ini”, the indices of the print quality
which can presumably be used to print the aligner reports
NB: if more than one sheet is printed, with the subsequent sheets showing only a part of
the text and not a cut part of the graphics, check first of all that the dimensions of the
paper used correspond to the paper dimensions set in the printer.
Setting the customer LOGO for paper printouts
To customise the print on paper (adding the customer’s logo), it is necessary to enable it
in the aligner set-up and modify the following files:
imgprbarra3.bmp
imgprbarra4.bmp
These files are installed in the path:
c:\program files\alignment\graphics\image .
The logo size must be 1100x354 pixel.
ENABLING EXTRA WHEEL ALIGNER
FUNCTIONS
Additional wheel aligner functions are enabled by updating its main protection SIM
CARD.
Upgrading is performed with the “Upgrade SIM CARD” obtained by ordering the relati-
ve accessory kit.
The “upgrade cards” obtained by ordering the relevant accessory kit carry specific
identification symbols:
Animated
Adjustment
Procedure
Card which enables the aligner for use of animated adjustment help
functions..
Audi
VW
Procedure
Card which enables the procedure for aligning cars made by the
AUDI / VOLKSWAGEN automotive group.
Mercedes
Benz
Procedure
Card which enables the procedure for aligning MERCEDES cars.
To update the main SIM CARD, the card must first be inserted in the Hard Lock (Fig. 3)
and and run the relative procedure using icons ,