Cormach GEO 10, Руководство по обслуживанию

Страница: 25 / 44

Technical service manual
GEO 10
25
On the third window the following three options are available:
• Technical Assistance: allows access to the configuration utility
- Head hardware.
- DEMO procedure enabling.
- ALT+TAB enabling.
- Communication hardware port.
• Smart Card data card: allows access to the aligner upgrade utility by means of the Smart
Card.
• Radio modules configuration: allows access to the radio circuit board programming utility.
SERVICE PROGRAM
Utility programs for wheel aligner service and/or setup.
To run the program, which is currently separate from the wheel aligner software itself, exit
the wheel aligner program and go to the operating system using icon and digit the
password “end” (in lowercase letters).
Click twice on icon “Alig_Service_USB.exe”.
The Service program will open.
When the program is accessed, there are 5 buttons in the left-hand column:
• SERVICE
• SOFTWARE
• RADIO
• SETUP.
• ABOUT
Clicking on the “SERVICE” button accesses the diagnostics procedure, which lists all the
values of the angles measured for each head.
Pressing the “SOFTWARE” button accesses the procedure for programming/upgrading the
head firmware.
Press the “RADIO” button to start the radio unit and Hard Lock programming utility.
Pressing the “SETUP” button allows the user to select the service program working language.
Click the “ABOUT” button to display information about the program (software release num-
ber, date and time).