EM 9250
Operator’s manual
103
UK
CAUTION
Check that the system which fits the weight to the rim is in optimum condition.
A weight which is not fitted properly or correctly may come off as the wheel rotates, thus
creating a potential danger.
Pressing the
button while the wheel is moving interrupts the wheel spin before
time and the
A STP
message is displayed.
If the “
RPA
” (centred position) programme is active, at the end of each balancing spin the
machine stops the wheel in the position for application of the weight on the outer side; if it
is equal to zero, the wheel is stopped in the inner side weight application position.
Pressing the
button with the guard raised, automatic search for the second side
position is activated.
This function is described at length in the AUTOMATIC POSITION SEARCH section.
• Manually applied adhesive weights
- Select the first side to be balanced.
- Turn the wheel until the central element of the corresponding position indicator lights
up.
- Apply the indicated balancing weight in the position of the rim corresponding to 12
o'clock.
WARNING
The application position of the adhesive weight can be changed from 12 o'clock to 6 o'clock
by following the instructions in the set up menu “Adhesive weight application position ”.
WARNING
- for applying the adhesive weight in the MOTORCYCLE (ALU) programmes, always use 12
o'clock as the reference regardless of the setting in “SELECTION OF ADHESIVE WEIGHT
APPLICATION POSITION”.
IMPORTANT
in ALU1 and ALU2 programmes
the unbalance displayed by the
machine on the outer side refers
to the adhesive weight centre
of gravity at the swinging unit
bearing flange, (Fig. 17)
17
Содержание CompactLine EM 9250
Страница 1: ...Cod 4 119438 del 09 2015 EM 9250 CompactLine...
Страница 68: ...EM 9250 Operator s manual 137 UK...
Страница 70: ...138 EM 9250 Operator s manual Notes...