Corghi Artiglio Master J, Руководство оператора

Страница: 98 / 446

98 Artiglio Master J Operator manual
2. Tyres that are excessively inflated could explode, causing the dispersion of debris in
the air, which can cause accidents.
3. Tyres and rims that do not have the same diameter do not correspond. Never attempt
to mount or inflate tyres and rims that do not correspond. For example, never mount
a 16.5” tyre on a 16” rim, or vice versa. It is very dangerous. Tyres and rims that do not
correspond could explode, causing accidents.
4. Never exceed the inflation pressure for the tyre indicated by the manufacturer on the
side of the tyre itself. Carefully check that the air hose
is well inserted in the valve.
5. Never bring your head or other body parts close to a
tyre during inflation or bead insertion operations. This
machine is not a safety device against the possible ex -
plosion risk of tyres, air chambers or rims.
6. Maintain a suitable distance from the tyre changer while
inflating. Do not approach it.
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufficient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly with the rim dimensions (printed inside the rim) or if the rim or the tyre
are defective or damaged.
Never exceed the pressure recommended by the tyre manufacturer.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep other people at a distance.
DANGER
7. Risk of crushing Presence of moving parts. Contact with moving parts could result in an
accident.
The machine may only be used by one operator at a time.
• Keep other people away from the tyre changer.
• Keep your hands and fingers away from the rim edge during the de
-
mounting and mounting process.
• Keep your hands and fingers away from the head during operation.
• Keep your hands and other body parts away from moving parts.
• Do not use tools other than those supplied with the tyre changer.
• Use lubricant that is specific for tyres in order to prevent tyre seizure.
• Pay attention while handling the rim and tyre and while using the lever
8. Hazard of electric shock.
• Do not clean the electric parts with water or high pressure air jets.
• Do not operate the machine with a damaged power cord.
• If an extension is necessary, use a cable with nominal features equal to or
greater than those for the machine. Cables with nominal features that are
lower to those of the machine could overheat and cause a fire.
• Make sure that the cable is positioned so that no one will trip over it and it
cannot be pulled.