Corghi Artiglio Master 28, Руководство оператора

Страница: 45 / 84

Artiglio Master 28
Operator’s manual 127
EN
14- Operate the lever
to position
the fixed tool at the
correct height for
removing the second
bead (Fig. 37l).
15- Operate the lever
and move
the lower bead breaking disc upwards
(Fig. 37m - 37n) up to 5 mm above the
top edge of the rim.
16- Press the pedal to turn the
turntable and press the button
to activate penetration of the lower
bead breaker
.
17- If necessary, operate the control to
slightly lift the lower bead breaker disc.
6.10. MOUNTING
Always check that the tyre/rim match-mounting is correct in terms of compatibility (tubeless
tyre on tubeless rim; tube type tyre on tube type rim) and geometrical size (keying diameter,
cross-section width, off-set and shoulder profile) before mounting.
Also check that rims are not deformed, that their fixing holes have not become oval, that
they are not scaled or rusty and that they do not have sharp burrs on the valve holes.
Check that the tyre is in good condition with no signs of damage.
CAUTION
37i
37l
37m
37n