Corghi Artiglio Master 28, Руководство оператора, Страница: 52 / 84

134
Artiglio Master 28
Operator’s manual
6.12.c. SPECIAL PROCEDURE (TI VERSION)
Before starting with the operations described below, make sure there is no dirt, dust
or other impurities near the inflation nozzles.
CAUTION
41
41a
41b
If while inflating the tyre is not positioned correctly on
the rim due to excessive space between the tyre and the
rim, a jet of pressurised air can be used with the clamps
of the T.I. accessory (quick bead insertion) (optional).
Verify that both upper and lower tyre beads and rim
bead seat have been properly lubricated with an
approved assembly paste.
1. Make sure that the rim is correctly clamped on the
turntable (Fig. 41).
2. Remove the valve core if it has not already been
removed (Fig. 41a).
3. Connect the Doyfe connector of the inflating
hose to the valve stem (Fig. 41b).
4.
Pull the tyre up slightly in order to reduce the
space between the upper bead and the rim
(Fig. 41c).
5. Fully press down on the inflation pedal
and at the same time, press the 2 buttons on the
accessory to emit a jet of high pressure air from
the four jets, which make it easier to position
the tyre beads (Fig. 41d).
41c
41d