Corghi Artiglio Master 28, Руководство оператора, Страница: 24 / 84

106
Artiglio Master 28
Operator’s manual
spacer, then fix it using the 4 M8 screws supplied
(see Fig. 11).
- Grease the seat of the pivot pin and then position
the spacer (E, Fig. 12) and the shims (F, Fig. 12).
- Using a suitable lifting device, position the bead
pressing arm on the support, verifying the exact
positioning of the spacer and shim.
- Insert the pivot pin (F, Fig. 13) and fix it to the
support by means of the M8 screw (G, Fig. 13)
supplied.
- Secure the two spring brackets (H, Fig. 14 and
H1, Fig. 14a) using the M6 screws supplied, then
position the springs (I, Fig. 14 and I1, Fig. 14a).
- Fasten the bead pressing tool supporting plate to
the cover (L, Fig. 15) by means of the 2 M6 screws
(M, Fig. 15) supplied.
- Connect the bead pressing tool pipe (N, Fig. 16)
to the T-shaped fitting of the filter/regulator unit
(O, Fig. 16).
12
F
E
14
I
H
11
H1
I1
10
G
13
F