Corghi AGTT 1600, Руководство оператора

Страница: 54 / 188

54 Operator's manual
AGTT 1600A - AGTT 1600
mAInTEnAnCE
WARNING
CORGHI declines all liability for claims deriving from the use of non-original spare
parts or accessories.
WARNING
Unplug the machine from the socket and make sure that all moving parts have been
locked before performing any adjustment or maintenance operation.
WARNING
Do not remove or modify any parts of this equipment except in the case of service
operations.
WARNING
Before removing unions or pipes, make sure that the fluids are not pressurised. If
pressurised oil escapes, it can cause serious injury.
WARNING
Keep the work area clean.
Do not use pressurised water jets to wash the machine.
You are strongly advised not to use compressed air to clean moving components.
When cleaning the area take all possible measures to avoid spreading dust, as far
as possible.
To make your machine last longer and perform better, it is recommended to:
- clean the turntable and the guide pins once a week with environmentally friendly sol-
vents;
- grease (Fig. 52) all of the machine's moving parts at least once a month;
- clean the filter cartridge approx. every 1500 hours of operation;
- check the oil level in the power unit (Fig. 53), from the wet rod to the plastic cap there
must be 5cm / 2 inch. Top up with API HS 68 oil or another equivalent type if necessary.
The check must be performed with the cylinders "closed" placing the cap on the tank,
without tightening it. It is recommended to replace the oil in any case after 1500 hours
of operation or once a year.