TigoStarter K6
User Manual
Copyright © 2020 CoreTigo Ltd.
Page
19
of
32
3.
TigoMaster 2TS Evaluation
This chapter describes several advanced features that are part of the example application and provided with the
development kit. The example application runs on the Nucleo board provided with the kit. This chapter refers to this
mode of operation.
The Master USB connection mentioned previously will also give you access to its UI which is addressable as a
Serial COM port at a Baud Rate of 115200.
•
Make sure the Nucleo-F767ZI USB marked in Figure 34 is properly connected to your computer.
•
Open a Serial interface application. (we will continue the explanation using PuTTY).
•
On the Putty configuration window, on the Session category choose Serial Connection type, choose the
COM port relevant to the Master USB COM port, under Speed type in 115200 and click on Open.
Figure 15 - Putty configuration window
