TigoStarter K6
User Manual
Copyright © 2020 CoreTigo Ltd.
Page
13
of
32
2.3.2.
TigoMaster 2TS Development
The Nucleo-F767ZI board is used to run Application code and control the 2TS Master. The Nucleo board
has an example master application flashed on it.
The TigoMaster application source code is provided as a reference for quick and easy ramp up to develop a
TigoMaster application.
Reference:
•
TigoMaster SMI – API/SW Guide for TigoMaster 2TS
2.3.2.1.
TigoMaster 2TS Development - HW setup
The Nucleo board’s need to be configured properly to work with the TigoMaster 2TS.
➢
TigoMaster 2TS has a 16PIN connector connected (via adapter board) to Nucleo-F767ZI
Development board.
➢
Nucleo Board also required to be connected (Via CN1 Header) USB cable to Computer for power
and debug usage.
Figure 7 - TigoMaster 2TS Development - HW setup
