TigoStarter K6
User Manual
Copyright © 2020 CoreTigo Ltd.
Page
16
of
32
2.4.
Connect the TigoAir Device
Connect the Device (E2) evaluation board to a 2nd computer USB port using an “A to mini-B USB” cable.
2.4.1.
TigoMaster (E2) Device Development - HW setup
Figure 11 - TigoAir (E2)
2.4.2.
TigoMaster (E2) Device Development - SW setup
To flash the MCU use the ST-Link debugger, JTAG to SWD cable adapter and SWD 10 pin flat cable
provided with the development kit.
Figure 12 - TigoAir with ST-Link debugger
Power Input
Serial Input
Power Input
SWD Input
