TigoStarter K6
User Manual
Copyright © 2020 CoreTigo Ltd.
Page
12
of
32
TigoEngine getting started:
1.
Masters View
; Connect a new IO-Link W-Master\Gateway using the “Connect new master” button at the
top right side of the screen.
2.
Port Configuration View;
use
this tab as main window for scan, pair, unpair, debug, monitor and reset an
available W-Device.
1.
Soft reset to W-Master\Gateway
2.
Click
on Scan Tab to open area & use scan button on the right side of the view.
Figure 6 - TigoEngine Scan
3.
Locate the UID of device needed for pair (Hexadecimal representation)
4.
Select the:
•
required W-Device from the scan results area
•
available port from the ports area
•
Click on the Pair button
5.
Use pop-up window with configuration parameters to verify or update the values of link
parameters.
6.
When link is completed, the specific port row will appear as Operate in the Port Configuration
view and PDin section will show the input data of the W-Device (for devices that support PDin)
