manualshive.com logo in svg

Coretec VCX-4400-E, Инструкция по установке и эксплуатации

Поделиться
Скачать
Coretec VCX-4400-E Скачать руководство пользователя страница 17

VcxNetBurner to multicast a command to all devices to set their Update Server IP to the  
computer running VcxNetBurner. The devices will only remember the Update Server IP until the 
next reboot or power cycle. Reboots automatically occur after a successful firmware update. It is 
not necessary to perform a Broadcast Server operation if the devices have already been 
programmed with an Update Server IP. This can be done with Telnet using the command: 
 

UPDATEIP xxx.xxx.xxx.xxx  

 
It is also possible to configure a device to use a hostname (or URL) to address the server if a 
DNS server is also configured. The following are example Telnet commands for this operation.  
 

 UPDATENAME www.myupdateserver.com  
DNSIP xxx.xxx.xxx.xxx  

 
However, unless you have specific reasons for setting up your update server in the device, the 

Broadcast Server

 command will suffice for updating your VCX-2400 device.  

 
The 

Lock Update 

allows you to update all VCX-Devices of one type (i.e.- all VCX-2400E 

connected to the network) simultaneously. We do not recommend this if you are just beginning 
to use the software, due to the risk of overlooking a failure of one particular device. 
 
Rather than this, it is suggested to update only one device at a time. This is done by following the 
first 6 steps of the instructions listed above and then Telnet into the unit you wish to update and 
issue the following command: 
 
 

UPDATEFIRMWARE 

OR 
 UF 
 

You should monitor the Activity screen for progress. The Telnet session will also provide some 
text display that indicates completion. If the operation is successful then the device will 
automatically reboot and the Telnet session will be dropped. If the operation failed then you 
should retry the UPDATEFIRMWARE command. 

 

 
TIPS: If using Telnet, use the DISPLAY IP command to verify that an update server IP is listed. 
Also ensure that the update server IP is reachable. This would be true if the update server is the 
same as the computer in the Telnet session. 

 

The 

Perform Packet Tests 

tests to see if the firmware can be downloaded successfully without 

actually being burnt into the unit. 

 
 

The 

Write CTC File 

is for Coretecs internal use only. 

 

 
Help Menu 

Содержание VCX-4400-E







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды