User and Maintenance Manual
“D” Caliper brake
Model D-M
Model D05
Model D1
Model D2
Model D3 and D3-ID
Date: 2013/07/01
Revision: 1
www.coremo.it
Pag.
10
di
14
Figure 3
Personnel assigned to these operations must take special care, working cautiously
when bleeding the circuit, wearing suitable PPE such as gloves, goggles and safety
footwear and taking any other precautions necessary before proceeding.
9.
BEDDING-IN:
The initial braking torque may be from 30% to 50% less than the rated value until
the brake lining adjusts to the disc.
8.
Operation
8.1.
Power supply of the product
Chapter 5.1 contains a table of the tangential force provided by each single type of product
and the relevant equation for calculating the braking torque of each brake as a function of the
diameter of the disc used.
The control pressure for pneumatic brakes (D05, D1, D2, D3) must not exceed 6 bar while for
hydraulic brakes the limit is 100 bar.
The technical department of COREMO OCMEA can provide information, suggestions and
assistance for correct application and use of the brake.
The wrong power supply pressure will result in a tangential force different to the value
indicated in this manual; the braking torque of the product will therefore be different to
the value desired and represent a risk to safety aspects.
