User and Maintenance Manual
“D” Caliper brake
Model D-M
Model D05
Model D1
Model D2
Model D3 and D3-ID
Date: 2013/07/01
Revision: 1
www.coremo.it
Pag.
8
di
14
Tangential force
Brake model
2937 N
D-M
1760 N
D05
4180 N
D1
8250 N
D2
13970 N
D3
16355 N
D3-ID
Table 1
The brake can be mounted in any position as it is provided with a balancing system for the
levers and alignment of the brake shoes. Anchor the brake to the supporting base using 3 class
8.8 M12 screws and a tightening torque of 85 Nm.
2.
Adjust the play between the brake linings and the disc using the play adjuster and a n. 12 Allen
key, rotating in the appropriate direction (Figure 1); when a play of 1 mm has been obtained
between the disc and each brake lining, lock the adjuster in position screwing the nut (C61600)
all the way down using a n 36 spanner and locking the adjuster (C61728) using a n. 5 Allen key.
Adjust the screw located between the levers using a n. 10 spanner (Figure. 1), until the weight
of the thruster is balanced; when balanced lock the screw by tightening the nuts.
Figure 1
3.
Adjust the brake shoes using the grub screw C61724 rotating it in the appropriate direction
with a n. 3 Allen key; the friction surface of the brake linings must be parallel to the surface of
the disc (Figure 2).
