07
Refresh
Wizard -- Repeater mode
SSID
Your Target Network
a0:21:b7:bf:9f:c8
B+G+N
WPA2 - PSK
100%
6
Mac
Channel
Encrypt
Signal
Select
Select
4. Click the Select button to choose a WiFi network to extend
5. In the Key (Network password) field, type the existing WiFi
network password (also called the passphrase or security
key) and click the Save&Reboot button, wait 1 minute to
reboot the extender.
When the extender connects to your existing WiFi network
successful, the extender’s new WiFi network name will
change to “
Coredy WN300_EXT
”, confirm it on your
computer or WiFi device.
If the extender could not connect to your existing WiFi
network, make sure you type the correct password of your
existing WiFi network and try again.
6. Unplug the extender and move it to a new location that is
about halfway between your router and the area with a
poor router WiFi signal.
Note:
Click the Refresh button if the wireless Network list
couldn't loads completely or successfully.
LAN
WAN
WPS WLAN
POWER
WPS
WLAN WAN LAN1 LAN2 LAN3 LAN4 WPS
