09
Within two minutes, press the WPS button on your router
or access point.
3. Unplug the extender and move it to a new location that is
about halfway between your router and the area with a
poor router WiFi signal.
4. Using a smart phone to help you choose a spot where the
extender-to-router connection is optimal.
5. If there is not full WiFi signal on your smart phone , plug
the extender into an outlet closer to the router and try
again.
Keep moving the extender to outlets closer to the router
until the full WiFi signal on smart phone.
The location that you choose must be within the range of
your existing WiFi router network.
When the extender connects to your existing WiFi network
successful, the extender’s new WiFi network name will
change to “
Coredy WN300_EXT
”, confirm it on your
computer or WiFi device.
If the extender could not connect to your existing WiFi
network, try again. If it still does not work, see
Method 1:
Connect with a web browser
on
page 7
.
LAN
WAN
WPS WLAN
POWER
WPS
WLAN WAN LAN1 LAN2 LAN3 LAN4 WPS
