06
Method 1.
Connect with a web browser
.
Method 2.
Connect with WPS
. For more information,
see
Method 2: Connect with WPS. For more
on page 8.
Connect to an Existing WiFi Network
To extend the range of your WiFi network, you
must connect the extender to your existing WiFi
network. You can do this in one of two ways:
2
1. Use a WiFi network manager on a computer or mobile
device (recommended) to find and connect to the extender
WiFi network “
Coredy WN300
” , type the password (PIN
number) on the label of rear panel extender if required.
2. Launch a web browser, enter
http://192.168.10.253/
or
http://ap.setup/
in the address field of the web browser,
when prompted, enter
admin
for the user name and
admin
for the password, both in lowercase letters.
3. Click the Repeater in the Mode Wizard field.
LAN
WAN
WPS WLAN
POWER
WPS
MAC:80:3F:5D:93:6B:46
PIN:XXXXXXXX
Method 1: Connect with a web browser
