23
Q1
How to reset WN300 to factory settings?
Q2
I am connected to Coredy WN300_EXT and
launched a browser, but I cannot log in the Setup
Page/Web Management Page?
(1)
(2)
Power on the WN300, hold the Reset button by
using a Reset Pin for approximately 3 seconds.
Release the reset button then all lights on.
When some of lights slow down flashing, the device
has been reset successfully.
TROUBLESHOOTING
LAN
WAN
wps
WLAN
POWER
Reset
Make sure that your computer is set up to use DHCP
(most are).
Relaunch the web browser and type
http://192.168.10.253/ or http://ap.setup/ in the
address field. Type your user name and password and
click the LOG IN button.
Reset the extender to factory setting.
