01
WPS - Method:
You can also use the WPS function as an alternative
Set-up method, if you have a WPS button available on your
primary router.
Hold the WPS button of your Primary Router/WiFi AP till
the WPS LED starts blinking.
Press and hold the WPS 3 seconds on the Rear Panel.
Once WPS light starts blinking on it as well, please wait for
a minute for The primary router/AP and the Extender
WN300 to pair up and then connect to the "Coredy
WN300_EXT" SSID in your Smart Phone using your
primary router's WIFI password.
6. Enter your Router's/AP's WIFI password in the
Password/WIFI Key/Security key column and click on
"Apply"
7. In the next window, you'll see the reboot process with a
Bar. When the Bar reaches 100%, (Leave the device for
1 minute to let it reboot itself).
8. Open the list of available networks again using your
smartphone. Find out the New SSID "Coredy
WN300_EXT" and connect with it using the same
password as of your primary router/AP.
9. If the internet works, unplug Coredy WN300 and plug it
halfway between your Router and the Device intended
for the internet usage/dead zones in your home where
you were getting low to no WIFI signals.
