12
1.
Power on the AP
, Plug the AP into an electrical outlet
near to your wired Ethernet.
2. Connect the AP to your wired Ethernet port with the
Ethernet cable came with your AP.
3. Use a WiFi network manager on a computer or mobile
device (recommended) to find and connect to the AP WiFi
network “
Coredy WN300
” , type the password (PIN
number) on the label of rear panel AP if required.
4. Launch a web browser, enter
http://192.168.10.253/
or
http://ap.setup/
in the address field of the web browser,
when prompted, enter
admin
for the user name and
admin
for the password, both in lowercase letters.
LAN
WAN
WPS WLAN
POWER
WPS
MAC:80:3F:5D:93:6B:46
PIN:XXXXXXXX
Cable Your Extender
The following image shows how to cable your AP:
LAN
WAN
WPS WLAN
POWER
WPS
WAN Port
LAN Port
WAN Port
Ethernet cable
LAN4
LAN3
LAN2
LAN1
WAN
Internet
DSL or Cable
