51
www.powerbox-systems.com
Check menu, and briefly press Update. Depending on which version is currently loaded in your CORE transmitter, it is ab-
solutely essential to observe the following procedure, otherwise the Linux system may crash, and you will need to return the
transmitter to our Service department. This problem has been cured with Version 1.6.
NOTE
• Update from Version 1.0 or 1.4:
Pressing Update opens a window, and the transmitter invites you to carry out a restart. Do not switch the transmitter off imme-
diately!! It is essential to wait for about 20 seconds, as the files must first be copied. When this period has elapsed you can
restart the transmitter, and the update will be completed automatically.
• Update from 1.5:
Nothing happens when you press Update.
Do not press Update a second time
– the transmitter is already working, and
copying the files. Simply wait until the transmitter displays the message that you need to restart the transmitter. You can then
restart the transmitter, and the update will be completed automatically. As of Version 1.6 a Status message relating to the copy
process appears immediately, followed by a Complete message when the copy process is finished.
• Update from 1.6 or higher:
As of Version 1.6 a Status message relating to the copy process appears immediately, followed by a Complete message when
the copy process is finished.
5.1.2. Wifi Update
The WiFi update is only from version 2.0. The essential preparation is to set up the WiFi system as described under Point 6.
Access to your router or mobile hotspot must be present. The rest of the process operates automatically. If you press Update and
a connection to your WiFi exists, all the necessary files will be downloaded from the web and installed. Afterwards the transmitter
must be powered down and then rebooted, exactly as with a USB update.
