Coral Telecom DX2000XL, Руководство по программированию для пользователя

Страница: 63 / 141

User & Programming Manual
DX2000 XL – Hotel Version
63
Chapter 4
Keys on Operator Console
Audio Level Adjustment
The audio level adjustment is used to control the sound that is emitted from the telephone’s
speaker and handset. CORAL DX2000 XL provides three types of key phones. Two type of
key phones offers digital volume control. The same volume control can be used to control
handset voice level, ringer volume and speakerphone volume & works on situation specific
mode.
Another type of key phone offers separate volume controls for the speaker and the handset.
Knobs are present on the sides of your key telephone set for both the speaker and for the
handset. While conversing through the speaker, voice volume can be adjusted using the
speaker volume control knob. The speaker volume will also be the same when activating
background music or voice paging. While conversing through the handset, receiver volume
can be adjusted using the receiver volume control knob.
One-Touch Keys
Each key telephone set has some one touch keys ( The number of keys are dependant on the
model of the key phone) which can be programmed according to your requirement. The keys
have bicolor LEDs that indicate the status of an extension or a trunk line. The keys can also
be programmed to store any global Memory bank number. The programming has to be done
using the system programming. The keys will glow red when the programmed extension or
trunk line is busy with any extension or trunk. That will glow green when they are busy with
your extension. You can use these keys to access any extension or trunk by just pressing the
corresponding key.
DSS (Direct Station Selector)
An additional equipment can be installed with the operator key phone that will work as the
part of the operator key phone. This special equipment will be known as Direct Station
Selector’. The direct station selector (DSS) has some keys, each of which has a LED. DSS
will be defined through the system programming. The keys on the DSS can be programmed
according to your requirement. The keys can be programmed to show the status of an
extension or a trunk line. It can also be programmed to store a global memory bank number.
The DSS keys can be operated similar to the one-touch keys on your key set.