9.
Why some writers won’t copy?
9
If those writers are associated with USB 2.0/Firewire IEEE 1394 connections (normally a
USB or Firewire logo sticker will be placed in front of such writer’s tray), please make sure
the USB 2.0/Firewire connections is off and restart your system. For more information,
please refer to “Appendix A: External Device (USB 2.0/Firewire 1394) Setup Guide”.
9
Reset back to default. ( Troubleshoot #10 )
9
Contact our tech support.
10. How do I reset my system back to default?
a) Go to menu 12. Utilities.
DUPLICATOR 2.20
12.Utilities
Utilities
b) Press the “ENT”/Enter button.
1.Disc Info
Utilities
5.Load Default
c) Press down button until you see
“Load Default” on the 2
nd
line
Load Default
d) Press “ENT”/Enter button.
Press OK to Continue
Utilities
5.Load Default
e) Wait for 3-4 seconds.
DUPLICATOR 2.20
f) Press “ESC”/Escape button.
12.Utilities
DUPLICATOR 2.20
g) Press down button until you see
“Shutdown” on the 2
nd
line.
15.Shutdown
Shutdown
h) Press “ENT”/Enter button.
Press OK to Shutdown
System Checking OK!
i) Press “ENT”/Enter button.
Ready to Power Off
j) Power off the system and power it back on. All settings should be restored back to
default.
- 37 -