Step 3:
Once the Mix Mode selection is submitted, you shall see following Preparation
screen and the corresponding trays that do not contain disc(s) in them will
automatically be ejected:
Preparing
Waiting for Master
Or
Preparing
Waiting for a Blank
If either one of the above screens is displayed for more than 2 minutes after you
have placed your master disc or blank disc into the drives, please check the disc
quality.
Step 4:
After you’ve placed an Audio CD containing the track(s) you wish to copy, and a
blank CD-R media in the writer drive(s), please allow 5-10 seconds for the system to detect
them. After they have been recognized, then you should see the following screen:
Step 5:
When you see the above screen shot, you can press the
up or down button to
display the playtime of each track on this audio CD and press the “ENT”/Enter button to
select the track you wish to be mixed. Once a track is selected, you shall see the symbol “*”
on the left of the track number on the 2nd line as shown in the below screen.
Total: 0 Trk 0m: 0s
Track 1: 4m:31s
“Total:
0
Trk
0m:
0s”
indicates
that
you have
zero
track(s)
selected
and
it
has
zero
minutes
and
zero
seconds
playtime.
“Track
1:
4m:31s”
indicates
currently
you
are
focusing
on
track
one
of
the
Audio
CD
you’ve
inserted
and
has
a
running
time
of
four
minute
and
thirty
‐
one
seconds.
Total: 1 Trk 4m:31s
*Track 1: 4m:31s
If the track you have selected will cause the total playtime of all audio tracks to be
more than your blank CD-R media capacity, you should see
the
following screen.
Over Blank Disc Capacity
Press OK to Continue
- 22 -