c) Please refer to the “Input Name and Number” section of “Chapter 2: Getting to know
your System” to enter the desired amount. Then press the “ENT”/Enter to continue
on to the next step.
Step 4:
Once the Counter selection is submitted, you shall see the following Preparation
screen and the corresponding trays that do not contain disc(s) in them will automatically be
ejected:
Preparing
Waiting for Blanks
If the above screen is displayed for more than 2 minutes after you have inserted
your blank discs, please check the quality of the discs.
Step 5:
After you’ve placed your blank discs into the drives, please allow 5-10 seconds for
the system to detect them. After they have been recognized, you shall see the following
screen:
By default, the “Auto Start” setting is set to “Auto”. Therefore, if your system is not
completely filled with blank discs and there is no activity within 30 seconds, or if all
writers are filled and the system detects this, the system will start automatically.
Preparing
7 Disc Detected, Go?
The
“7”
indicates
there
are
seven
discs
recognized
by
the
Writer.
Actual
quantity
may
be
different
depending
on
your
machine.
Actual
quantity
may
be
different
depending
on
the
size
of
your
machine
or
the
number
of
discs
you
inserted.
Once the number of blank discs you inserted matches the number of discs
detected on the screen, press “ENT”/Enter (if you are not using Auto Start or wish
to speed up the process) to confirm and the following Processing screen will
appear.
Processing...
Please Wait
If the number of blank discs you inserted does not match the number of discs
detected on the screen, please give 10-15 seconds for the system to recognize all of
your blank discs.
Step 6:
After 2 or 3 seconds of processing time, one of the following Copy progress screens
will appear. The left-hand screen is shown when “Specify Counter” is selected and the right-
hand screen is shown when “No Counter” is selected.
- 17 -
