Copland DRC205, Руководство пользователя

Страница: 15 / 36

15
- % $ $ &
With the “ Control panel ” you can also design and test your personal
playback modes and store them in the playback modes for P1 and P2, please refer to the
section in regard to “ Operation via PC/computer ”.
% ' &
The Copland DRC205 and the Dynaton Digital Room Compensation (DDRC)
engine is designed to support future updates and improvements.
Important note: The DDRC engine in Copland DRC205 is optimised to
requirements of Copland, and is different from standard Dynaton DDRC engines!
Upgrades should always be from Copland to secure full operation of the Copland
DRC205 after an upgrade!
5 ; $ % ' 5* '
Before being able to operate the Copland DRC205 via a computer the software on the
following CD-ROM must be installed on a Windows 98/ME/2000/XP compatible PC/computer.
Connect the USB cable to the [Computer] connector on the rear panel of the Copland DRC205
and to a USB connector on your PC/computer.
Note: The software cannot install correctly if the USB cable is not connected
between the Copland DRC205 and the PC/computer.
Note: The software cannot install correctly if the power is switched off to the
Copland DRC205.
Insert the CD-ROM (that is supplied with the Copland DRC205) into the CD-ROM (or DVD)
drive on your computer.
The installation software automatically starts up and is ready for installation!
Note: If you have disabled AUTORUN on your CD-ROM/DVD drive, then you must
manually start the installation software by double-clicking the SETUP.EXE file on
the CD-ROM!