Air Source Heat Pump Water Heater
1
1 Precautions for Use
indicates the prohibited operations.
indicates instructions that must be
followed.
indicates instructions to which special attentions must be paid.
Before you use this product, please read the following instructions carefully:
Caution
For any exceptions such as
burning smells, please cut off
the power supply and then
contact GREE authorized
maintenance center.
If an exception persists, the air
source water heater may be
damaged, which may even
cause an electric shock hazard
or cause a fire.
Do not operate the water
heater with wet hand.
Otherwise, an electric shock
hazard may be caused.
Before installation,
check whether the voltage of
the local power grid
accords with the voltage on
nameplate of the unit, and
capacity of the power supply,
power cord or socket is
suitable for input power of
this unit.
Dedicated lines must be
used for the power supply to
prevent a fire.
Do not use multipurpose
sockets or mobile wiring
boards to connect wires.
Otherwise, overheating or
even a fire may be caused.
Pull out the power plug and
drain the main unit and water
tank when water heater is not in
use for a long time to prevent
cracking caused by
cold weather.
Do not damage wires or
use undesignated wires.
Otherwise, overheating or a
fire may be caused.
Before cleaning, please cut
off the power supply.
Otherwise, an electric shock
hazard may be caused.
Use dedicated circuits with a
leakage circuit breaker
protection for the power supply
and ensure sufficient capacity.
Otherwise, overheating, a fire,
or an electric shock hazard
may be caused.
Do not change the power
cord or socket without any
consent. Wiring tasks must
be completed by qualified
electricians. Ensure proper
grounding for the metal part
of the unit, and do not
change the grounding mode.
