Coolmay CX-WIFI-2NET, Руководство пользователя

Страница: 18 / 93

CX-WIFI-2NET module user manual
Shenzhen Coolmay Technology Co.,Ltd
www.coolmay.com
Page
18
,Total 93 Pages
Ethernet interface function (AP)
CX-WIFI-2NET module Ethernet interface function (AP+ dual network port)
The CX-WIFI-2NET module functions as an AP and forms a network centered on
the module. The IP addresses of all devices on the network work in the same network
segment as the modules.
2.4.2 CX-WIFI-2NET module Ethernet interface function (STA routing mode)
CX-WIFI-2NETModule Ethernet interface function
（
STA
）
The CX-WIFI-2NET block acts as a STA and the module works in routing mode.
After the module is connected to the AP, obtain the IP address from the AP (as shown
in Figure 192.168.1.100). The modules themselves form a subnet (default
10.10.100.254), and the devices on the Ethernet interface are assigned addresses by
the module (see Figure 10.10.100.101). Thus, as PC1 is in the subnet (NAT), the
connection from PC1 can be connected to PC2 (because CX-WIFI-2NET works in
routing mode), but PC2 cannot actively connect to PC1.
2.4.3 CX-WIFI-2NET module Ethernet interface function (STA bridge mode)