Cool-Icam CIC-280, Руководство пользователя

Страница: 19 / 24

19
For Macintosh® Users:
MAC
Symptom Problem Solution
Shut down all other applications and attempt to
reinstall the driver, or download the updated driver
from www.coolicam.com and install the updated
driver.
Upload all images to your PC as soon as possible.
(please refer to Battery Guidance section in User’s
Manual.)
If you need to change batteries, and retain the
images in your
G2
’s memory, ensure you are
connected to a PC which is turned on via the USB
cable, which will then draw power from the PC whilst
you insert fresh batteries.
Upload all images to your PC or insert another
SmartMedia™ Card.
If you need to change batteries, and retain the
images in your
G2
’s memory, ensure you are
connected to a PC which is turned on via the USB
cable, which will then draw power from the PC whilst
you insert new batteries.
“ Digital Camera Driver ” does not load.
You have lost power to your
G2
by either:
Insufficient battery power
Removing the battery without being con-
nected to your PC (turned on) via the
USB cable.
Your
G2
’s memory is full.
This means there is insufficient power to
upload images to your computer.
I receive an error message when I am
installing “ Digital Camera Driver ”
All the images I have taken do not appear
on the
G2
.
The Green LED is not working although I
switched on my
G2
.
My
G2
LCD displays “ ”.
Check all cables connections are secured.
* Always wait for the message to revert back to
number of images taken on your LCD.
• Always switch the G2 on first before connecting
to the USB cable.
• Always let G2 swotch off using the auto off
function.
Connection failure or
The G2 has not completed the image
processing when you have tried to upload
the image.
I cannot upload images to the PC.
Upload saved images immediately, then replace
battery.
Battery power is too low to continue taking
images.
Battery indicator icon is blinking.
Make sure the SmartMedia™ Card is inserted all the
way in and close the slot door properly.
The card slot door is not closed properly. I cannot switch on my
G2
after inserting a
SmartMedia™ Card.
Put
G2
CD in CD ROM drive. No CD in CD-ROM drive. I cannot access any Funhouse’s
templates.
Please also refer to the help files & User Guides that accompany the enclosed applications.
For further information and support, please visit our website: http://www.cool-icam.com