Cool Energy EcoStore, Руководство пользователя

Страница: 33 / 45

Cool Energy EcoStore Heat Pump Water Heater
32 | P a g e
•
Restore the connection to the electric supply;
•
Restart the boiler.
5.11 Outside cleaning
For the cleaning of the outer shell only use soapy solutions, absolutely avoiding abrasive products
containing organic thinners (alcohol, benzine, etc.).
5.12 General notes
Always use tools that are appropriate for the intended purpose.
Always replace the gaskets and/or the o-rings ensuring the hydraulic sealing.
Only use genuine spare parts.
During reinstalling make sure that:
•
the resistance is properly housed, and the sealing gaskets are correctly installed;
•
the safety and regulation devices (thermostats) are properly installed inside their housings;
•
before reconnecting the equipment to the mains fill it (referring to the appropriate section) and
check that there are no water leaks.
5.13 After-sale service
In case of errors or malfunctions, switch off the equipment and disconnect the power supply. In the
first instance call the installer for technical support service.
6 MEASURES TO BE ADOPTED IN CASE OF MALFUNCTIONS
MALFUNCTIONS POSSIBLE CAUSE
SOLUTION ADN
EXPLANATIONS
The water is cold and the
display is turned off.
Bad connection to the supply
plug.
Connect again the supply plug.
The water temperature is set
too low. Set the water temperature at a
higher value .
The temperature control is
damaged
Call the assistance .
The temperature sensor is
damaged.
Water does not go out.
The water supply was
suspended. When the water supply will be
restored, it will turn to normal.
The water pressure is too low.
Use the system when the
pressure returns to normal.
The entry water valve is closed . Open the entry water valve.
Water loss.
The hydraulic connections are
not well sealed. Control and seal all hydraulic
connections.