Cool Energy EcoStore, Руководство пользователя

Страница: 12 / 45

Cool Energy EcoStore Heat Pump Water Heater
11 | P a g e
3 INSTALLATION AND FIRST START-UP
(qualified personnel only)
CAUTION!
•
The installation room must be 20 m
3
or larger and have suitable air exchange and not be subject
to sub zero conditions.
•
The equipment must be installed in compliance with the national installation
regulations.
•
Operations involving the hot water heat pump must only be performed by competent /
qualified personnel!
•
Observe the safety regulations.
•
The installation environment, electrical and hydraulic systems of the equipment must comply
with local regulations in force.
•
You need to install the equipment at the prescribed distance from the room walls and
ceiling, to ensure easy maintenance.
•
The surface on which the equipment is to be installed must be able to bear its weight.
•
The equipment ventilation openings must not be obstructed.
•
The chosen environment must be suitable for the equipment IP degree, in accordance with the
regulations in force;
•
The ambient temperature (or the temperature of the input air) must range between -
20°C and +43°C.
•
If possible, install the equipment in a room allowing to exploit the excess heat generated by
tumble-driers, refrigerators, freezers, etc.
•
Air must be neither excessively purified nor too contaminated with dust.
•
There must be a suitable drain connection to discharge condensation from the unit.
CAUTION!
U
The equipment is not intended to be used by any persons ( including children)
U
U
having reduced sensory or mental faculties, or lacking experience or knowledge, unless they
U
U
are under the supervision of a person in charge of their safety, or they have received proper
U
U
instructions regarding equipment usage.
Children must be watched to ensure that they don't play with the equipment.
3.1 Hydraulic connection
Installations must conform to local regulations in force. We recommend the integration of a
magnetic filter f o r t h e c o l d f e e d water supply. The link pipes (hot water, recycle, in-out
exchanger) must be perfectly isolated according to the energy norms in order to avoid heating
dispersions.
We recommend that you install the equipment close to the main hot water drawing point, to prevent
heat dispersions along pipes, and if possible, near a drain, for easier emptying and condensate
discharge