Cool Energy EcoStore, Руководство пользователя

Страница: 15 / 45

Cool Energy EcoStore Heat Pump Water Heater
14 | P a g e
3.4 Electrical connection
WARNING:
U
The equipment is already factory-wired and is equipped with a plug for the
U
U
connection to an outlet having appropriate electrical characteristics.
U
Verify that the mains voltage complies with the value specified in the label applied on the
U
U
equipment, and that the mains can supply a sutable pressure and flow.
To disconnect the equipment from the mains you need to use a two-pole switch complying with the
EN standards (contact opening 3mm, preferably equipped with fuses). The connection must be
established by inserting the plug into the appropriate outlet, that must comply with the regulations
in force.
WARNING:
U
Switching on the equipment when it is not filled with water will seriously damage
U
U
the refrigerating units and the electrical resistance.
WARNING:
U
If the supply cable is damaged, it must be replaced by the manufacturer or by its
U
U
technical support service, or anyway by a person having a similar qualification, to prevent
U
U
any risk.
4 USAGE INSTRUCTIONS
(User)
4.1 Switch-on
WARNING:
U
Before switching on the equipment, always verify the correctness of the electrical
U
U
connection; also check that the tank is filled with water, to avoid seriously damaging the
U
U
refrigerating unit and the electrical heating elements.
4.2 Electronic control
The heat pump water heater is equipped with an electronic regulation system for the management
of the temperature and of the complementary E-Heater.
4.2.1 Display