6
w w w . c o o l a z o n e . c o m
Operating Procedures
Power (Emergency Stop)
To ensure that the fan is functioning normally, first turn on the power switch. The unit
should make a short beeping sound, and all lights on the control panel should flash
once. “Temperature Display” is now ready for use.
Auto Control
Automatic Start: Push the “AUTO ON/OFF” button. Water pump starts when “AUTO ON
” lights up. A timer counts down from 30 seconds while the pump sprinkles water over
the cooling pads, after 30 seconds the fan automatically starts.
Operation Timer
Each short push on the “SET TIMER” button programs 5 minutes of operating time. Press
the “SET TIMER” button for 3 seconds to program 1 hour of operating time.
After the set operating time has expired, the unit goes into auto shut-down mode
whereby the water pump shuts down, a 15 minute timer is activated, and the fan
continues to blow to dry the cooling pads. When the 15 minute timer is complete, the
unit powers down.
for example,
if 4 hours of operating time is required, only 3 hours and 45 minutes is
needed when setting the timer. After the operating timer has expired, the unit will
activate the automatic shut off system.
Automatic Shut Off System
Press the “AUTO ON/OFF” button to manually turn off the fan. When pressed, the unit
will activate the automatic shut-off system whereby the water pump shuts down,
“AUTO OFF ” lights up, a 15 minute timer is activated and the fan continues to blow to
dry the cooling pads. When the 15 minute timer is complete, the unit powers down.
ThE AUTO CONTROL SYSTEm:
