CONVEY-ALL CST-1634, Руководство оператора

Страница: 31 / 50

01.2016 4-1
Operator’s Manual: Commercial Seed Tender (CST-34 Series)
4.1 FUELS, FLUIDS AND LUBRICANTS
Fuel & Engine Oil:
If equipped, refer to the engine operator’s manual, to
find specific instructions.
• crankcase capacity
• type of fuel to use
Hydraulic Oil:
If equipped, use a standard heavy-duty hydraulic oil
for all operating conditions.
Section 4: SERVICE AND MAINTENANCE
• Review the Operator’s Manual and all safety items
before working with, maintaining the machine.
• Place all controls in neutral, stop engine, remove
ignition key and wait for all moving parts to
stop before servicing, adjusting, repairing or
unplugging.
• Follow good shop practices:
- Keep service area clean and dry.
- Be sure electrical outlets and tools are properly
grounded.
- Use adequate light for the job at hand.
• Before applying pressure to the hydraulic system,
make sure all components are tight and that all
hoses and coupling are in good condition.
• Always use personal protective devices such as
safety glasses, gloves and hearing protection,
when performing any service or maintenance.
Servicing Safety
• Relieve pressure from hydraulic circuits before
servicing or repairing.
• Keep hands, feet, hair and clothing away from
moving and/or rotating parts.
• Make sure there is plenty of ventilation. Never
operate the engine in a closed building. The
exhaust fumes may cause asphyxiation.
• A fire extinguisher and first aid kit should be kept
readily accessible while performing maintenance
on this equipment.
• Periodically tighten all bolts, nuts and screws and
check that all cotter pins are properly installed to
ensure unit is in a safe condition.
• Keep safety signs clean. Replace any sign that is
damaged or not clearly visible.
Grease:
Use an SAE multipurpose high temperature grease
with extreme pressure (EP) performance. Also
acceptable, SAE multipurpose lithium based grease.
Storing Lubricants:
Your machine can operate at top efficiency only if
clean lubricants are used. Use clean containers to
handle all lubricants. Store them in an area protected
from dust, moisture and other contaminants.